How SERVPRO Follows an Extensive Checklist to Make Sure That ALL Traces of a Fire are Removed From Your Boulder Home
Removing Fire Damage From Boulder Homes
Remediating the effects fire has on a Boulder home requires training, experience, and the right equipment. Before any action takes place, restoration experts need to know how far the fire spread and the way it went from the point of origin to the rest of the home.
Most Boulder fire damage is evident to the eye, but homeowners and even some restoration agencies forget to ask about what they cannot see. SERVPRO inspectors use a checklist developed over decades in the business to ensure we do not miss anything, no matter how small or unimportant it may appear to be to the owner.
To begin with, How close were the fire to the heating and air vents and the furnace? The closer the fire was to a vent or the actual furnace, means more smoke and soot went into the vents.
Was the A/C or Heat active during the fire? If it was, then the smoke and soot were circulated through the ducts and into other parts of the home. The fire itself can circulate air depending on how fast it burns, but an active system dramatically increases the problem.
How long did the fire burn? The longer it went on before being extinguished means, the more smoke and soot residues it generated.
The answers to these questions help SERVPRO teams determine what type of cleaning tools and chemicals we need for each room affected by the fire and the residues left behind. Now, technicians can start cleaning, repair, and restoration efforts.
The first step is to remove the filters. If the system was active, particulates from the fire are in them, and we can replace them immediately. It may be necessary even if the filters are reusable. Sticky residues take many labor hours to remove them, and it is often cheaper to replace them.
Next, we clean the ducts. Team members can clean residues close to the vents by hand, but extensive contamination farther in requires more. They use a fogger to generate a cloud of cleaning agent and a fan to force it through the system carefully. The cloud touches every inch of the ductwork, killing any active bacteria and breaking up the residues, stopping further problems.
Team members can also add a chemical agent that neutralizes the odors left behind after a fire if needed. After fully deploying the cleaning and deodorizing agents, technicians increase the fan speed to force any loose residues from the ducts and sending them outside the home.
At SERVPRO of Lafayette / Louisville, we want to restore your home after a fire completely. If you have any damage or even just a lingering odor, contact us at (303) 604-6607 to schedule an inspection. We are here for you.
Click here for more about Boulder.